Qilin Bell instrument recently launched a fast and economical solution for liquid waste disposal. This is a compact integrated vacuum operating system that uses an independent vacuum source. The system is small in size and extremely flexible, providing a comfortable desktop suction experience for your experiments.

Convenient and safe features of GL-805

★ Unpack the GL-805 desktop aspirator, take out the instrument, screw on the screw cap and plug in the power supply to use

★ The vacuum pump is very quiet when it is working, and the pumping power can be adjusted

★ It is very convenient to replace a full liquid collection bottle, just unscrew the lid and discard the waste in the bottle. GL-805 uses standard screw-top blue cap bottles that are very easy to find in the laboratory, with first-class convenience

★ GL-805 is small in size and can be placed in any laboratory bench or laminar flow cabinet

★ The built-in anti-overflow device can effectively protect the liquid from entering the pump body. When the liquid rises and touches the buoy, the buoy will rise and support the gas collection pipe to prevent the liquid from being pumped into the pump.

★ A 0.22um polymer bacterial filter is installed on the effusion bottle and the pump body. The outer diameter of the filter is 55mm, the filter membrane is directly 47mm, and the filtration accuracy is 0.22um, which can filter general bacteria.

★ The waste liquid bottle of the instrument is fixed by a fence to avoid accidentally touching the bottle and tipping over during operation.

Wide application of GL-805

★ Aspirate a small amount of liquid from a microcentrifuge tube/microplate

★ Recovery of supernatant after centrifugation (for example: RNA/DNA extraction)

★ Wash Western blot or Elisa test

★ Recovery of remaining reagents

★ Western Blotting Buffer

★ Extract excess liquid from slides or petri dishes

★ Recovery of pathogenic bacteria liquid

★ Cell staining, cell culture fluid extraction

★ When ordering, you can choose a dark brown collection bottle according to your needs (the standard configuration is a transparent bottle)

Technical specifications:

Adjustable vacuum range: -300~ -800mpa

Vacuum flow rate: 6L/min (air)

Liquid absorption speed: 15ml/s

Noise level: less than 50db(A) within 1 meter

Machine size: 320*120*270mm (with collection bottle)

Collection bottle capacity: 1000ml

Using power supply: 220V

Machine weight: 3.5KG

Friendly reminder:

1. After changing the collection bottle or draining the waste liquid from the collection bottle, please tighten the lid. If it is not tightened, it will cause air leakage during liquid suction and failure to suction liquid.

2. When the waste liquid is collected to 800ml, the waste liquid should be discarded in time, otherwise the waste liquid may be sucked into the pump body of the instrument and damage the instrument. This behavior is not covered by the warranty. Please pay special attention when using it.

3. Please clean the tubing of the instrument frequently. If the tubing is not cleaned for a long time, some fungi may grow in the tubing and block the tubing and cause the inability to absorb liquid.